Single Frequency
Fiber Lasers
MPBC single frequency fiber lasers are sources of single-frequency polarized light offering low phase and intensity noise, narrow spectral linewidth and long coherence length. They are comprised of a single-frequency near-infrared Yb-doped fiber laser with a single-mode narrow-band outputand electronics which provide temperature stabilization as well as active stabilization of the laser output power. The laser is offered in a 2RU benchtop or rack mountable air-cooled package.
Features
- Low intensity noise
- True single frequency operation without mode hops (single-frequency models)
- Long coherence length
- Interlock
- Safety key
Applications
- Applications
- Interferometry
- Doppler sensors
- Atom Cooling
- Microscopy
- Holography
- Bio Photonics Applications
Single Frequency NIR Fiber Lasers
Min | Nominal | Max | ||
---|---|---|---|---|
Wavelengths Available | 1028 or 1064 | nm | ||
Output Power | up to 10 | W | ||
Power Tunability Range | 20 - 100 | % | ||
Emission Linewidth (FWHM) | 50 | 100 | kHz | |
Long Term Wavelength Stability | Nominal - 0.02 | Nominal + 0.02 | nm | |
Degree of Polarization | 98 | 99 | % | |
Relative RMS Intensity Noise at Nominal Power, Integrated over 5 Hz to 100 kHz | 0.1 (typical) | 0.3 | % | |
Long Term Output Power Drift (8 hours) | -2 | 2 | % |
Single Frequency Visible Fiber Lasers
Min | Nominal | Max | ||
---|---|---|---|---|
Wavelengths Available | 514 or 532 | nm | ||
Output Power | 200, 500, 1000 | mW | ||
Power Tunability Range | 20 - 100 | % | ||
Emission Linewidth (FWHM) | 100 | 200 | kHz | |
Long Term Wavelength Stability | Nominal - 0.02 | Nominal + 0.02 | nm | |
Degree of Polarization | 98 | 99 | % | |
Relative RMS Intensity Noise at Nominal Power, Integrated over 5 Hz to 100 kHz | 0.1 (typical) | 0.3 | % | |
Long Term Output Power Drift (8 hours) | -2 | 2 | % |